Solar for homes and business
sunpulse.solar
Power through every grid cut at home. Pay less for daytime power at work.
Four partsOne quiet system
Every home system is built from the same four parts. We choose and size each one for your house.
Solar panels
Mounted on your roof, angled to the sun and placed around water tanks and shade.
Hybrid inverter
Turns solar power into household power and decides where it goes: the house, the battery or the grid.
Battery bank
Charges from the midday sun and carries your chosen circuits through the evening and grid cuts.
Switch-over & monitoring
Switches to backup automatically when the grid drops, and shows what the system is doing on your phone.
Pick the systemthat fits your home
Not sure which one you need? We recommend one after the site visit, with the reasons written down.
On-grid
Lower bills
- Best for
- Homes with steady grid power
- Battery
- None
- In a grid cut
- Switches off for safety
Hybrid Most homes
Savings and backup
- Best for
- Homes with regular grid cuts
- Battery
- Yes, sized to your circuits
- In a grid cut
- Keeps your chosen circuits on
Off-grid
Full independence
- Best for
- Farms and remote houses
- Battery
- Yes, a larger bank
- In a grid cut
- No grid needed
What stays onwhen the grid goes off
You choose the circuits. We size the battery and inverter around them, so nothing trips when the power cuts.
- Lights
- Fridge & freezer
- Internet & TV
- Fans
- Water pump
- Security cameras
- Phone & laptop charging
- Washing machine
- Air conditioning, with a larger system
The final list is agreed with you before we size anything.
For business
Daytime powerSmaller bills
Most businesses use the most power while the sun is up. Large roof systems carry those loads directly.
- 01
Load analysis
We read your bills, meters and generator logs to see when and how you use power.
- 02
Yield & return
Expected output from your roof area and shading, set against what you spend today.
- 03
The right system
On-grid for daytime loads, or hybrid with batteries when you need backup.
- 04
Install around you
Work planned around your hours, with phased connection and minimal downtime.
Who it suits
- Offices & shops
- Factories & workshops
- Hotels
- Schools & clinics
- Farms & irrigation
Built for real operations
- Pump and compressor start-up loads checked in design
- Roof, carport or ground-mounted arrays
- Protection and metering at your main board
How it works five simple steps
- 01
Site visit
We check roof space, shade, structure, your distribution board and current loads.
- 02
Design & proposal
A system sized to your circuits, with equipment, price and timeline in writing.
- 03
Installation
Mounting, wiring and connection to your board, done neatly and safely.
- 04
Testing & handover
We test switch-over and show you how to read the system.
- 05
Maintenance
Panel cleaning and inverter and battery checks, on a schedule that suits you.
Your roof stays yours.
- Neat mounting on flat concrete roofs
- Placed around water tanks, stairs and shade
- Cables in proper trunking, not across the roof
- Safe wiring and protection at your distribution board
Looked after for years.
- Regular dust cleaning, which matters in our climate
- Inverter and battery health checks
- One team to call if anything changes
- Room to add panels or batteries later
Good questionsClear answers
Can solar replace my generator subscription?
Many homes cut their amps a lot. Full independence needs a larger battery bank, and we'll tell you honestly what that takes for your house.
How big a system do I need?
It depends on the circuits you want to keep on and for how long. We work it out from your real loads during the site visit.
Will it work on cloudy or dusty days?
Yes, at lower output. The battery covers the gap, and regular cleaning keeps dust from cutting production.
Can I add more panels or batteries later?
Yes. We plan the inverter and wiring so the system can grow when you need it.
Does my business need batteries?
Not always. Mostly-daytime loads may only need on-grid. Batteries add night and outage backup.
Can solar run our pumps and compressors?
Yes, with correctly sized inverters. We check start-up loads during design.
How long does installation take?
A few days on site once equipment arrives. We confirm the timeline in your proposal.
What maintenance does it need?
Very little: dust cleaning and periodic inverter and battery checks. We can do both for you.
Your buildingOur next good idea
Tell us about it. An engineer replies within one business day.
Let’s get started ↗︎